COLOR TELEVISION
LENARO 26
LXW 68-8720 DOLBY
LENARO 32
LXW 82-8720 DOLBY
___________________________
SET-UP AND SAFETY
Please note the following information when setting up your television set.
10
cm
10
cm
20
cm
20 cm
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
L
e
n
a
r
o
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
To assure sufficient ventilation make sure there is enough space
around it in the wall unit.
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
L
e
n
a
r
o
Do not place any vessels such as vases on the television, as they may
spill liquid, thus presenting a safety risk.
olf
G
g
a
m
Place the television set on a solid, level surface. Do not place any
objects such as newspapers on the television set or cloth or similar items
beneath it.
L
e
n
a
r
o
Do not place the television set close to heating units or in direct sunlight,
as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the
television set. For reasons of safety, have a specialist remove any dirt
deposits in the set from time to time.
AV
AV
2
1
VICE !
I
PC
Audio in
V
L
OUT
R
A
N
T
I
N
L
R
Y
P
b
P
r
HDMI
1
HDMI-2
PC-IN
A
V
COMPONENT VIDEO INPUT
A
C
I
! SER
Do not open the television set under any circumstances. Warranty
claims are excluded for damage resulting from improper handling.
Make sure the power cord or the power supply unit (if provided) are not
damaged.
TV
R
The television set may only be operated with the mains cable/adapter
supplied.
AV
AV
2
1
AUDIO
PC
Audio in
V
L
OUT
R
A
N
T
I
N
L
R
Y
P
b
P
r
HDMI
-
1
HDMI-
2
PC-IN
A
V
COMPONENT VIDEO INPUT
Thunderstorms are a danger to all electrical devices. Even if the tele-
vision set is switched off, it can be damaged by a lightning strike to the
mains or the antenna cable. Always disconnect the mains and antenna
plugs during a storm.
Clean the screen with a soft, damp cloth. Only use plain water.
Note:
Do not connect any other equipment while the device is switched on.
Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the
external devices and the antenna.
3
SET-UP AND SAFETY___________________________
Please note when deciding where to put the device that furniture sur-
faces are covered by various types of lacquer and plastic, most of which
contain chemical additives. These may cause corrosion to the feet of the
device, thus resulting in stains on the surface of the furniture which can
be difficult or impossible to remove.
The screen of your LCD television meets the highest quality standards
and has been checked for pixel faults.
Despite the great care taken in manufacturing, technological
reasons make it impossible to completely discount the possibility that
some pixels may be faulty.
Provided they are within the thresholds specified by the DIN norm, pixel
faults of this kind cannot be regarded as a defect as defined by the war-
ranty.
Caution:
If you want to use a wall bracket for your television, make sure you read
the assembly instructions for the wall bracket carefully or have your spe-
cialist dealer mount it for you.
When buying the wall bracket, make sure that all the fastening points
needed on the television are there on the wall bracket and that they are
all used when it is mounted.
4
__________
CONNECTION/PREPARATION
Connecting the antenna and the mains cable
AV
AV
2
1
TV
R
AUDIO
PC
Audio in
V
L
R
AN
L
R
Y
P
b
P
r
HDMI-1
HDMI-2
PC-IN
AV OUT
COMPONENT VIDEO INPUT
3
2
1
1
2
3
Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-
na socket on the television.
AUDIO
L
R
V
L
R
ANT IN
Plug the mains cable supplied into the »AC IN« mains socket of the tele-
vision.
AV OUT
COMPONENT
Plug the mains cable into the wall socket.
Notes:
AC IN
Do not plug in the power cord of your device until you have connected
the external equipment and the antenna.
Only connect the television using the power cord supplied to a suitable
earthed safety socket.
Do not use an adapter plug or extension lead which does not meet the
applicable safety standards. Do not tamper with the power cord.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert the batteries (Mignon type, for example UM-3 or AA, 2x1,5V).
Observe the polarity (marked on the base of the battery compartment).
3
Close the battery compartment.
Note:
If the television no longer reacts properly to remote control commands, the
batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from used
batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be dis-
posed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
5
____________________________________________
OVERVIEW
Connections on the television
AV 2
AV 1
AUDIO
AUDIO
PC
Audio in
L
R
Y
Pb Pr
V
L
R
ANT IN
HDMI-1
HDMI
-
2
PC-IN
AV OUT
COMPONENT VIDEO INPUT
AV 2
AV 1
Euro/AV socket (FBAS signal).
Euro/AV socket (FBAS signal,
RGB signal).
AV OUT V L R
ANT-IN
Audio and video output.
Antenna socket.
COMPONENT VIDEO INPUT
AUDIO LR
Y Pb Pr
Audio signal input (YUV signal).
Video signal input (YUV signal).
HDMI-1
HDMI-2
PC-IN
HDMI socket, audio/video signal
input (HDMI).
HDMI socket, audio/video signal
input (HDMI).
VGA socket, video signal input
for PC.
PC Audio in
AC IN
Audio signal input for PC.
Socket for the mains cable.
6
____________________________________________
OVERVIEW
Controls on the television
e
n
a
r
o
L
L
e
n
a
r
o
S
-V
H
S
R
L
P
V
id
e
o
T/VA
V
MNEU
Ȃ
Power switch, switches the device to and from standby
mode.
+ P –
TV/AV
MENU
Switch the television on from standby.
Channel selection.
Select a function in the menu.
Opens the pre-selection for AV channels.
Select within the menu with »+ P« or »P –«,
confirm with »g –«.
Opens the »MAIN MENU« menu.
Press »+ P –« to select an item.
Press »TV/AV« to activate a function.
Press »+ g –« to set a function.
Press »MENU« to close the menu.
+ g –
Adjust the volume.
Select menu functions.
Video
L R
Video signal input for camcorder.
Audio signal input for camcorder.
Video signal input for S-Video camcorder.
Headphone connection (3.5 mm jack).
S-VHS
y
7
____________________________________________
OVERVIEW
The remote control
Ǽ
Switches off the television set (stand-by).
1...0
Switches the television on from standby mode
Selects channels directly.
?
Displays the number and name of a station.
Switches to double character size in teletext mode.
Switches between picture formats.
Page stop in teletext mode.
E
PIP
AV
PIP
Shows an inset picture;
activates the double window function (two different
TV programmes on separate halves of the screen);
switches back to normal size.
z
TOP
MENU
MENU
TV-G
AV
Opens the pre-selection for AV channels.
Then selection with P+ or P-.
d
SCAN
DR
P
d
Sound on/off (mute).
Calls up the »Main menu«.
Zap function.
PAT
S
DVD
AUX
i
Z
P+, P-
Switches the television on from standby;
selects stations step by step;
Tele Pilot 170 C
moves the cursor in the menus up and down.
Ǹ Ƿ
Adjusts the volume;
moves the cursor left/right.
OK
Calls up the preset channels;
activates various functions.
TXT
TV-G
z
Switches between teletext and TV modes
Key has no function.
Selects various picture settings;
scrolls back a page in teletext mode.
Ȅ
Ƿ
F
Displays the time;
selects the next page in teletext mode.
Freeze-frame;
selects the desired chapter in teletext mode.
Selects various audio settings;
selects the desired topic in teletext mode.
8
____________________________________________
OVERVIEW
SCAN
PAT
S
Reveals answers in teletext mode.
Selects the Double Window function.
Selects the sub-pages in teletext mode.
Updates a page in teletext mode.
P
DR, DVD Switches to operation of a GRUNDIG digital receiver,
GRUNDIG digital receiver with hard disk (PDR),
AV
GRUNDIG DVD player or GRUNDIG DVD recorder.
PIP
Keep the appropriate button (»DR«, »DVD«) pressed
down. Then press the appropriate button.
z
Note:
TOP
MENU
MENU
The »DR« button has been programmed for operating
a GRUNDIG digital receiver (remote control level 1).
The »DVD« button has been programmed for
operating a GRUNDIG DVD player.
You can change this programming, see »AUX« button.
The functions available depend on the model of the
device you are using.
TV-G
d
SCAN
DR
P
PAT
S
DVD
AUX
Just try it out.
AUX
Programming the remote control for the operation of
external devices.
Tele Pilot 170 C
Press »AUX« and hold it down and press three
numerical buttons to enter the appropriate code:
»1«, »2«, »3« for a GRUNDIG DVD player.
»4«, »5«, »6« for a GRUNDIG DVD recorder.
»1«, »4«, »7« for a GRUNDIG digital receiver
(remote control level 1).
»2«, »5«, »8« for a GRUNDIG digital receiver
(remote control level 2).
»3«, »6«, »9« for a GRUNDIG digital receiver with
hard disk (PDR).
9
______________________________________________
SETTINGS
Setting television channels automatically
The television set is equipped with an automatic channel search
system.
You start the search and can then sort the television channels into
your order of preference.
99 preset positions are provided, to which you can assign television
channels from the antenna or from the cable connection.
Sprache
Deutsch
Dansk
Português
Svenska
Suomi
Türkçe
Eλληvικά
Hrvatski
Pyccꢀꢁꢂ
Español
Français
English
Italiano
Norsk
âesky
Sloven‰cina Româna
Slovensko
Magyar
Polski
Cꢃꢄꢅꢀꢁ
ꢆꢇꢈꢉapꢅꢀꢁ
Dutch
1
Switch on the television with »
press »P+« on the remote control.
Ȃ« on the television set, then
Auswählen
und bestätigen
OK
G
Ende
– The »Sprache« (Menu language) menu appears when the
television is first switched on.
Hint:
If the »Sprache« (Menu language) menu does not appear on
the screen, then set it in accordance with the chapter on reset-
ting all television channels on page 32.
Country
Germany
Austria
Belgium
Bulgaria
Croatia
Czech
Greece
Hungary
Iceland
Ireland
Italy
Romania
Slovakia
Slovenia
Spain
2
3
Select language with »P+«, »P-«, » « or » « and press
»OK« to confirm.
– The »Country« menu appears.
Ǹ
Ƿ
Sweden
Luxembourg Switzerland
Netherlands Turkey
Press »P+«, »P-«, » « or » « to select the country and
Ǹ
Ƿ
Denmark
United Kingtom Norway
»OK« to confirm.
Yugoslavia
– The search begins. It may last a few minutes, depending on
the number of television stations found.
– After the search the television switches to channel position 1
and the »Program table« menu appears.
Finland
France
Poland
Portugal
Select
and confirm
Back
Exit
OK
G
Changing stored channels
You can delete channels that have been stored more than once
during the automatic search. You can also store channels in a diffe-
rent preset position, change or enter the name of a channel as well
as skip channels.
Deleting channels
Program Table
01 ARD
02 ZDF
09
17 ----
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
S
S
S
S
S
S
S
S
1
In the »Program table« menu, select the station to be deleted
10
with »P+«, »P-«, » « or » «.
Ǹ
Ƿ
Ƿ
03 BR
11
S
S
S
S
S
S
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
2
3
Highlight the channel with » « (yellow).
05 SAT 1
06 PRO 7
07 BR
Ƿ
Press » « (yellow) to delete the channel.
08 TEL5
Note:
To delete other stations, repeat steps 1 and 3.
Skip
Move
Delete
Name
Select
Exit
10
______________________________________________
SETTINGS
Sorting television channels
1
In the »Program table« menu, select the channel to be moved
Program Table
01 ARD
02 ZDF
with with »P+«, »P-«, » « or » «.
Ǹ
Ƿ
09
17 ----
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
S
S
S
S
S
S
S
S
10
2
3
Highlight the channel with »
Ȅ
« (green).
03 BR
11
S
S
S
S
S
S
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
Select a new channel position by pressing »P+«, »P-«, » « or
Ǹ
05 SAT 1
06 PRO 7
07 BR
»
« and then press »Ȅ« to confirm.
Ƿ
– All of the channels that follow move up one position.
08 TEL5
Note:
Skip
To sort the other television channels repeat steps 1 to 3.
Select
Exit
Move
Delete
Name
Entering the channel names
(maximum of 5 characters)
1
In the »Program table« menu, select the desired channel with
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
Program Table
01 ARD
02 ZDF
09
17 ----
S
S
S
S
S
S
S
S
F
2
3
Highlight the channel with » « (blue).
10
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
03 BR
11
S
S
S
S
S
S
Select letters or numbers with »P+« or »P-«, move to the next
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
position with » « or » « and repeat.
05 SAT 1
06 PRO 7
07 BR
Ǹ
Ƿ
4
Store the channel name with »OK«.
08 TEL5
Note:
To enter additional channel names, repeat steps 1 to 4.
Skip
Move
Select
Exit
Delete
Name
Skipping television channels
You can mark television channels which should be skipped during
selection with »P+« or »P-«. A selection with the number keys is
also possible.
Program Table
01 ARD S
02 ZDF
09
17 ----
S
S
S
S
S
S
S
S
1
In the »Program table« menu, select the desired channel with
10
18 ----
19 ----
20 ----
21 ----
22 ----
23 ----
24 ----
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
03 BR
11
S
S
S
S
S
S
04 RTL
12 ----
13 ----
14 ----
15 ----
16 ----
z
2
Highlight the channel with »
« (red).
05 SAT 1
06 PRO 7
07 BR
– An »S« appears behind the name of the television station.
– You can deselect the selected channel by pressing the red
button again.
08 TEL5
Skip
Move
Delete
Name
Concluding the settings
Press »i« to finish the settings.
Select
Exit
1
11
______________________________________________
SETTINGS
Picture settings
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Picture
Brightness
Contrast
39
2
Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Colour
Sharpness
Hue
Noise reduction
Picture smart
To Page 2
Sharp
User
3
4
Select »Default settings« with »P+« or »P-« and the setting
»User« with » « or » «.
Ǹ
Ƿ
Select
Back
Exit
Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or
»Noise reduction« with »P+« or »P-« and press »OK« to con-
firm.
OK
G
and edit
Note:
The setting »Hue« only applies to NTSC programmes (e.g. for
playback of American television programmes on the video
recorder).
5
6
Press » « or » « to select the level, and then press »OK« to
confirm.
Ǹ
Ƿ
Press »i« to finish the settings.
Audio settings
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Sound
Volume
0
Balance
Sound type
Effect
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.
– The »Sound« menu appears.
Stereo
Normal
On
AVL
Equalizer
Headphones
Volume
1
Select »Volume« with »P+« or »P-« and adjust the setting with
« or » «.
Select
Back
Exit
and edit
»
Ǹ
Ƿ
Balance
1
Select »Balance« with »P+« or »P-« and adjust the setting with
« or » «.
»
Ǹ
Ƿ
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »Dual B «) and the
dubbed version on sound channel A (display: »Dual A«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.
1
Select »Sound type« with »P+« or »P-« and adjust the setting
with » « or » «.
Ǹ
Ƿ
12
______________________________________________
SETTINGS
Dolby Virtual*
Dolby Virtual is an innovative electronic solution, which is integra-
ted in the television set and only requires the built-in speakers to
produce Dolby Surround effects.
1
2
Select »Sound mode« with »P+« or »P-«.
Select »Dolby Virtual« with » « or » «.
Ǹ
Ƿ
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1
2
Select »Sound type« with »P+« or »P-«.
Press » « or » « to select the setting.
Ǹ
Ƿ
Automatic volume
The television channels broadcast at different volumes. The automa-
tic volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1
Select »AVL« with »P+« or »P-« and then select »On« with
« or » «.
»
Ǹ
Ƿ
Equaliser
The equaliser offers you four preset sound settings (Music, Sport,
Cinema and Dialogue) and one which you can create yourself
(User).
1
Select »Equalizer« with »P+« or »P-« and confirm with
»OK«.
Equalizer
User
ĵ
Ł
– The »Equalizer« menu appears.
12 dB
2
Select the audio setting »User« with »P+« or »P-« and confirm
with »OK«.
0 dB
– The frequency band »120 Hz« is activated.
-12 dB
3
4
Set the desired value with »P+« or »P-« and select the next
<120Hz 200Hz 500Hz 1.2kHz 5kHz 7.5kHz 12kHz>
frequency band with » « or » «.
Ǹ
Ƿ
Select
Back
Exit
OK
F
G
and edit
Press » « (blue) to save the setting.
Concluding the settings
Press »i« to finish the settings.
1
* Under license from Dolby Laboratories Licensing Corporation.
DOLBY and the Double-D symbol are registered trademarks of the
Dolby Laboratories Licensing Corporation.
ij
13
___________________
TELEVISION OPERATION
Basic functions
Switching on and off
1
Press »Ȃ« on the television set to switch it to standby.
2
Press »1…0« or »P+« or »P-« to switch on the device from
standby mode.
3
4
Press the »Ǽ« button to switch the television to standby mode.
Press »
Ȃ« on the television set to switch it off completely.
– This saves electricity.
AV
PIP
Selecting channels
1
2
3
Use »1…0« to select channels directly.
z
Press »P+« or »P-« to move up and down channels.
TOP
MENU
MENU
Open the channel list by pressing »OK«, select the station with
»P+« or »P-« and press »OK« to switch off the channel list.
TV-G
d
Selecting AV channels
SCAN
DR
P
PAT
S
1
Call up the »Source table« menu with »AV«.
DVD
AUX
2
Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
3
Switch back to the television channel with »1…0«.
Tele Pilot 170 C
Adjusting the volume
1
Adjust the volume with » « or » «.
Ǹ
Ƿ
Muting
1
Use » « to switch the sound off (mute) and to switch it on
again.
p
Displaying time
1
You can display the time by pressing the »
channels with teletext).
Ȅ« button (only for
Displaying information
1
Press »?« to display the information.
– The display disappears automatically after a short while.
Freeze-frame
If you wish to view a particular scene for longer, you can freeze the
frame of the current programme.
Ƿ
1
2
Press » « (yellow).
Ƿ
To quit this function, press » « again.
14
___________________
TELEVISION OPERATION
Picture settings
You can select four different picture settings.
1
Select the desired picture setting from »User«, »Natural«,
z
»Rich« or »Soft« with »
«.
– You can alter the »User« picture setting, see the ”Picture
settings” chapter on page 12.
Audio settings
You can select six different audio settings.
1
Select the desired sound setting from »User«, »Music«, »Sport«,
»Cinema« or »Speech« with » «.
F
– You can alter the »User« sound settings, see the ”Equaliser”
chapter on page 13.
Zap function
This function allows you to save the television channel which you
are currently watching and switch to other channels (zapping).
1
Select the channel you want to save in the zap memory with
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by
pressing »Z«.
– The display »BBC 1« appears in the screen.
2
3
Change channels with »1…0« or »P+« »P-«.
You can now use »Z« to switch between the saved channel (in
the example, BBC1) and the channel you were watching befo-
re.
4
Press »i« to quit the zap function.
– The display disappears.
15
___________________
TELEVISION OPERATION
Zoom function
This function enables you to enlarge the television or PC picture.
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2
Select »Picture« with »P+« or »P-« and press »OK« to
confirm.
– The »Picture« menu appears.
Picture
H Position
V Position
Phase
3
Select »Brightness« with »P+« or »P-« and press »P+« again.
– »Zoom« is selected.
Auto position
Zoom
4
5
6
Press »OK« to activate the zoom function.
To Page 1
Select
Back
Exit
Press »P+« or »P-« to change the size of the picture.
OK
G
and edit
To change the picture section press »OK« and then » «, » «,
»P+« or »P-« to select the section.
Ǹ Ƿ
7
Press »i« to quit the zoom function.
– The display disappears.
16
___________________
TELEVISION OPERATION
Changing the picture format
The television automatically switches to the 16:9 format if this
format is detected via the Euro-AV socket.
1
Select the picture format with »
format, for example »16:9«, appears on the screen.
– You can choose between the following picture formats:
«. The selected picture
E
»4:3« format
The picture is shown in 4:3 format.
»Auto« format
The picture format is automatically switched to »16:9« for 16:9
programmes.
For programmes in 4:3 format, the picture automatically fills the
screen.
»16:9« and »14:9« formats
During programmes in 4:3 format, the picture is stretched horizon-
tally if »16:9« or »14:9« is selected.
The picture geometry is stretched horizontally.
With actual 16:9 signal sources (from a set-top box on the Euro-AV
socket) the picture fills the screen completely and with the correct
geometry.
»Letterbox« format
The letterbox setting is especially suitable for programmes in 16:9
format.
The black borders which are usually at the top and bottom of the
screen are eliminated, 4:3 pictures fill the screen.
The transmitted pictures are enlarged, but are slightly cropped at
the top and bottom. The picture geometry remains unchanged.
The »Auto Letterbox« message appears for PAL Plus television
programmes.
»Panorama« format
This setting is suited to films with a large width/height ratio.
During programmes in 4:3 format the picture is stretched horizon-
tally if the »Panorama« function is selected. The picture geometry is
stretched horizontally.
»Subtitles« format
If you cannot read the subtitles which appear on the bottom of the
screen (especially during programmes with 4:3 format and if the
»Subtitles« format is selected), then select »Subtitles«.
17
___________________
TELEVISION OPERATION
PIP mode
PIP (picture in picture) allows you to watch an inset picture from a
second picture source in addition to the current channel.
Other television stations, DVD players, video recorders or satellite
receivers can be used as video sources. They must be connected to
the input sockets on the back of the device.
Displaying the inset picture
1
To display the inset picture, press »PIP« once.
Double window
1
To activate the double window function (split screen), keep
pressing »PIP«.
– The last selected main and inset pictures are shown next to
each other.
Selecting the channels for the inset picture and
the left side of the screen (double window)
1
Press »P+« or »P-« to move up and down channel positions
one at a time.
Selecting the channels for the main picture and
the right side of the screen (double window)
1
Press »1…0« to select channels directly, or select the video
source (DVD player, video recorder, SAT receiver); then call the
»Source table« menu by pressing »AV«, select the desired AV
channel position with »P+« or »P-« and press »OK« to
confirm.
Swapping the main and inset pictures
1
Press »Z« to swap the main and inset pictures.
Changing the position of the inset picture
1
Press »P« to move the inset picture.
Changing the size of the inset picture
1
Press »S« to change the size of the inset picture.
Ending the PIP function
1
To hide the inset picture, press »PIP« twice.
Quitting the double window
1
To quit the double window, press »PIP«.
18
_______________________________
TELETEXT MODE
TOP text or FLOF text mode
1
Press »TXT« to switch to teletext mode.
2
You can directly select teletext pages with »1...0«.
Note:
At the bottom of the screen, you will see an information line
consisting of a red, green and, depending on the station,
yellow and blue text field. Your remote control has buttons with
the corresponding colours.
z
3
4
5
6
7
Press »
« (red) to scroll back a page.
AV
PIP
Press »
Ȅ
« (green) to scroll to the next page.
z
Ƿ
Press » « (yellow) to select chapters.
F
Press » « (blue) to select topics.
TOP
MENU
MENU
TV-G
Press »TXT« to switch off teletext mode.
d
Normal text mode
SCAN
DR
P
PAT
S
1
2
3
4
5
Press »TXT« to switch to teletext mode.
DVD
AUX
You can directly select teletext pages with »1...0«.
Press »P-« to scroll back a page.
Press »P+« to scroll to the next page.
Press »TXT« to switch off teletext mode.
Tele Pilot 170 C
Additional functions
Skipping the waiting time
While a page is being searched for, you can switch to the television
channel.
1
2
Enter the teletext page number using »1…0« and then press
»P«.
– As soon as the page is found, the page number is displayed.
Press »P« to switch to the teletext page.
Increasing character size
If you have difficulty reading the text on the screen, you can double
the character size.
1
To enlarge the character size of a teletext page, press »?«
repeatedly.
19
_______________________________
TELETEXT MODE
Page stop
A multiple page may contain several sub-pages, which are automa-
tically scrolled by the transmitting station.
1
2
Stop the sub-pages with »
«.
E
Press »
« to quit the function.
E
Calling up a sub-page directly
If the selected teletext page contains further pages, the number
of the current sub-page as well as the total number of pages is
displayed.
AV
PIP
1
2
3
4
Call up the sub-pages with »S«.
Press »P-« to scroll back a page.
Press »P+« to scroll to the next page.
Press »S« to quit the function.
z
TOP
MENU
MENU
TV-G
d
Reveal answer
Certain teletext pages contain ”hidden answers” or information
which can be called up.
SCAN
DR
P
PAT
S
DVD
AUX
1
2
Display information with »SCAN«.
Conceal information with »SCAN«.
Tele Pilot 170 C
Split screen (Split Screen)
With this function you can see the television channel on the left and
the teletext page on the right.
1
2
To activate the split screen function, press »PAT«.
– The television channel and the teletext page appear next to
each other on the screen.
To deactivate the split screen function, press »PAT«.
20
______________
CONVENIENCE FUNCTIONS
Convenience functions with the »Features« menu
1
To open the »MAIN MENU« press »i«.
2
Select »Features« with »P+« or »P-« and confirm with »OK«.
Note:
Further operation is explained in the following sections.
Changing the menu language
Features
1
Select »Menu Language« with »P+« or »P-« and confirm with
»OK«.
– The »Menu Language« menu appears.
VCR mode
Menu Language
AV2 output
AV output
Off
TV
TV
0
Sleep timer
2
3
Select the language with »P+«, »P-«, » « or » « and press
Ǹ
Ƿ
Auto Blackline Detect Off
»OK« to confirm.
Parental lock
Off
Select
Back
Exit
Press »i« to finish the setting.
OK
G
and open
Entering the switch-off time for the sleep timer
You can enter a switch-off time. After this time has elapsed, the tele-
vision switches to standby mode.
Features
VCR mode
Menu Language
AV2 output
AV output
Off
1
2
3
Select »Sleep timer« with »P+« or »P-« and press »OK« to
confirm.
TV
TV
Sleep timer
0
Auto Blackline Detect Off
To enter the switch-off time (from 15 to 120 minutes), press
Parental lock
Off
»
« or » «.
Ǹ
Ƿ
Select
Back
Exit
Press »i« to conclude the setting.
and edit
Child lock
If the child lock is activated, the buttons on the television are not
operable.
Features
VCR mode
Off
Menu Language
AV2 output
1
2
Select »Parental lock« with »P+« or »P-«.
TV
TV
AV output
Press » « or » « to activate or deactivate the child lock
Ǹ
Ƿ
Sleep timer
Auto Blackline Detect
Parental lock
(On or Off).
Press »i« to conclude the setting.
Off
3
Select
Back
Exit
and edit
Automatic picture format modification (Auto
Blackline Detect)
If this function is activated and a programme with black bars
at the top and bottom is showing, the picture is enlarged
proportionally.
Features
VCR mode
Off
Menu Language
AV2 output
TV
TV
0
1
2
3
Select »Auto Blackline Detect« with »P+« or »P-«.
AV output
Sleep timer
Auto Blackline Detect
Parental lock
Off
Press » « or » « to activate or deactivate the function.
Ǹ
Ƿ
Off
Press »i« to finish the setting.
Select
Back
Exit
and edit
21
_______________
USING EXTERNAL DEVICES
DVD player, DVD recorder, video recorder or
set-top box
Note:
Which television socket(s) you connect your external devices to
depends on the sockets the external device is equipped with
and the signals which are available.
Note that with many external devices the resolution of the video
signal must be adapted to the input sockets on the television
(check the external device’s instruction manual). You can find
out which values you need to set by referring to the guidelines
in the section about connection options.
Note:
Do not connect any other equipment while the device is
switched on. Switch off the other equipment as well before
connecting it.
Only plug the device into the mains socket after you have
connected the external devices.
High definition – HD ready
Your television can playback high-definition television signals (HDTV).
You can connect the input sources (HDTV set-top box or High Definition
DVD player) to the »HDMI-1« or »HDMI-2« socket (digital HDTV
signal).
This ensures that you can view digital HDTV programmes, even if they
are copy-protected (HDCP High Bandwidth Digital Content Protection).
22
_______________
USING EXTERNAL DEVICES
Connecting a DVD player, DVD recorder,
video recorder or set-top box
With a digital audio/video signal
Video signal: digital video; resolution: standard 576p; HDTV 720p,
1080i.
Audio signal: digital audio (stereo, multi-channel compression,
uncompressed).
Channel position »HDMI 1« or »HDMI 2«.
AV
AV
2
1
SAT
AUDIO
PC
Audio in
V
L
R
ANT IN
L
R
Y
P
b
P
r
H
HDMI-
2
PC-IN
AV OUT
COMPONENT VIDEO INPUT
EURO AV
EURO AV
2
1
VCR
TV
RS 232
HDMI OUT
1
Connect the »HDMI-1« or »HDMI-2« socket on the television
and the corresponding HDMI socket on the external device
using a standard HDMI cable (digital video and audio signal).
Pb Pr
NPUT
HDMI
-
1
HDMI-2
HDMI
-1
HDMI
-
2
PC-IN
23
USING EXTERNAL DEVICES ________
With an analogue video signal (progressive)
Video signal: YUV; resolution: standard 576p; HDTV 720p, 1080i.
Audio signal: stereo, analogue.
Channel position »YPBPR«.
AV
AV
2
1
AUDIO
PC
Audio in
V
L
R
ANT IN
L
R
Y
P
b
P
HDMI
-
1
HDMI-
2
PC-IN
AV OUT
OMNENEO UT
Y
Pb
r/
VIDEO OUT
100-240 V~
50/60 Hz 15
W
S
VIDEO OUT
EURO AV
TV
HDMI OUT
AUUT
L
DIGITAL AUDIO OUT
1
2
Connect the »COMPONENT VIDEO INPUT Y Pb Pr«
sockets on the television and the corresponding sockets on the
external device using cinch cables (video signal).
AUDIO
Connect the »COMPONENT VIDEO INPUT L AUDIO R«
sockets on the television to the corresponding sockets on the
external device using cinch cables (audio signal).
L
R
Y
Pb Pr
ANT IN
COMPONENT VIDEO INPUT
Using the Euro/AV socket
Video signal: FBAS/RGB (AV-1), FBAS (AV-2).
Audio signal: stereo, analogue.
Channel position »AV1« or »AV2«.
1
Connect the »AV 1« or »AV 2« socket on the television and
the corresponding socket on the external device using a EURO-
AV cable (video and audio signal).
Note:
You can copy recordings via the television from one external
device to another by connecting the playback device to the
»AV 1« socket and the recording device to the »AV 2« socket,
then selecting the »AV1« channel. However, you will not be
able to watch a television channel.
24
_______________
USING EXTERNAL DEVICES
With S-Video signal
Video signal: Y/C.
Audio signal: stereo, analogue.
Channel position »SVHS«.
1
Connect the »S-VHS« socket on the television and the corre-
sponding socket on the external device using an S-Video cable
(video signal).
L
R
Video
-VHS
2
Connect the »L R« sockets on the television to the correspond-
ing sockets on the external device using cinch cables (audio sig-
nal).
With an analog TV signal
Video signal: FBAS.
Audio signal: stereo, analogue.
Channel position »AV3«.
1
Connect the »Video« cinch socket on the television and the
corresponding socket on the external device using cinch cables
(video signal).
L
R
Video
-VHS
2
Connect the »L R« sockets on the television to the correspond-
ing sockets on the external device using cinch cables (audio sig-
nal).
Using a video recorder, DVD player or
set-top box
1
Switch on the video recorder, DVD player or set-top box and
select the function you wish to use.
2
Press »AV«, select the input signal channel with »P+« or »P-«
(»AV1«, »AV2«, »AV3«, »SVHS«, »HDMI 1«, »HDMI 2« or
»YPBPR«) and press »OK« to confirm.
Switching VCR mode on and off
On certain video recorders, you can improve the picture stability of
the playback using this mode.
1
2
3
Press »AV«, select the channel with the connected VCR with
»P+« or »P-« and press »OK« to confirm.
Features
VCR mode
Call up the »MAIN MENU« menu with »i«.
– The »MAIN MENU« menu appears.
On
Menu Language
AV2 output
TV
TV
0
AV output
Select »Features« with »P+« or »P-« and press »OK« to con-
firm.
Sleep timer
Auto Blackline Detect Off
Parental lock
Off
4
5
Select »VCR mode« with »P+« or »P-« and select »On« with
Select
Back
Exit
»
Ǹ
« or » «.
Ƿ
and edit
Press »i« to conclude the setting.
25
_______________
USING EXTERNAL DEVICES
Selecting the signal for the AV output
With this setting you can select which signal is output at the Euro-AV
socket AV1 or at the AV OUT V L R cinch sockets.
The television station or the video/audio signal from connected
devices.
This enables you to transmit recordings from one external device
(e.g. a DVD player) to another using the television. Connect the
playback device to Euro-AV socket AV1 and the recording device
to Euro-AV socket AV2 and select the setting you require in the
»Special functions« menu.
– AV 2 output:
»TV« – the television channel that you are viewing or
»AV3« – the audio/video signal from the cinch sockets (AV3).
– AV output:
»TV« – the television channel that you are viewing or
»AV2« – the audio/video signal from the Euro-AV socket AV2.
Features
VCR mode
Menu Language
AV2 output
AV output
Off
TV
1
2
Call up the »MAIN MENU« menu with »i«.
Select »Features« with »P+« or »P-« and press »OK« to con-
firm.
TV
0
Sleep timer
Auto Blackline Detect Off
3
4
5
Select »AV2 output« or »AV output« with »P+« or »P-«.
Parental lock
Off
Select
Back
Exit
Select the desired option with » « or » «.
Ǹ
Ƿ
and edit
Press »i« to conclude the setting.
Headphones
Connecting headphones
S-
VH
R
S
1
Plug the headphone jack (3.5 mm jack plug) into the head-
phone socket on the left side of the television.
L
Vi
de
o
Selecting the sound settings for the headphones
1
2
3
Press »i« to open the »MAIN MENU«.
Select »Sound« with »P+« or »P-« and confirm with »OK«.
Select »Headphones« with »P+« or »P-« and confirm with
»OK«.
Headphones
Volume
Balance
Sound type
Bass
30
4
5
Select »Volume«, »Balance«, »Bass«, »Treble« or »Soundtype«
Stereo
with »P+« or »P-« and set with » « or » «.
Ǹ
Ƿ
Treble
Press »i« to finish the setting.
Select
Back
Exit
OK
G
and edit
26
_______________
USING EXTERNAL DEVICES
Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.
Connecting a decoder or satellite receiver
AV
2
AUDIO
PC
Audio in
V
L
R
ANT IN
L
R
Y
P
b
P
r
HDMI-
1
HDMI
-
2
PC-IN
AV OUT
COMPONENT VIDEO INPUT
Decoder
PAY-TV
1
Connect the »AV 1« socket on the television set and the appro-
priate socket on the decoder using a EURO-AV cable.
Using a decoder or satellite receiver
1
Switch on the television and the decoder or the satellite receiver.
2
Press »AV«, select the channel »AV1« with »P+« or »P-« and
press »OK« to confirm.
27
_______________
USING EXTERNAL DEVICES
Camcorder
Connecting the camcorder
1
Connect the yellow socket »Video« on the television and the
corresponding socket on the camcorder (VHS, Video 8) with a
cinch cable (picture signal);
or
connect the »S-VHS« socket (picture signal) on the television
and the corresponding socket on the camcorder (S-VHS, Hi 8)
with a S-Video cable.
S-
VH
S
R
L
i
de
o
2
Connect the white and red sockets »L R« on the television and
the corresponding sockets on the camcorder with a cinch cable
(audio signal).
Note:
There must not be video signals at »Video« and
»S-VHS« sockets at the same time. This could lead to picture
disturbances.
L
R
Video
-VHS
Operating with a camcorder
1
Switch on the camcorder, insert a cassette and start playback.
L
R
Video
-VHS
2
Press »AV«, select the »AV3« or SVHS« channel with »P+« or
»P-« and press »OK« to confirm.
Hi-fi system/AV receiver
Connecting the hi-fi system/AV receiver
AV
AV
2
1
AUDIO
PC
Audio in
V
R
ANT IN
L
R
Y
P
b
P
r
HDMI
-
1
HDMI-
2
PC-IN
AV UT
COMPONENT VIDEO INPUT
AC IN
WT–A
1
2
Connect the white and red sockets »AV OUT L R« on the tele-
vision and the corresponding sockets on the hi-fi system/
AV receiver with a cinch cable.
A
L
V
L
R
ANT IN
AV OUT
Connect the yellow »AV OUT V« socket on the television to the
corresponding socket on the AV receiver using a cinch cable
(video signal).
28
__________________________
PC MONITOR MODE
Connecting a PC
AV
2
1
AV
AUDIO
PC
udin
V
L
R
ANT IN
L
R
Y
P
b
P
r
HDMI
-
1
HDMI-
2
P
AV OUT
COMPONENT VIDEO INPUT
1
2
Connect the socket »PC-IN« on the television to the corre-
sponding socket on the PC using a VGA cable.
Connect the socket »PC Audio in« on the television to the cor-
responding socket on the PC using a cinch cable (audio signal).
PC
Audio in
MI-
1
HDMI
-
2
PC-IN
Note:
Adjust your PC to the monitor (for example, picture resolution
1024x768, picture frequency 60 Hz).
Selecting the channel position for the PC
1
Press »AV«, select the »PC« channel with »P+« or »P-« and
press »OK« to confirm.
Settings for the PC
1
Press »i« to open the »MAIN MENU« menu.
– The »MAIN MENU« menu appears.
2
Select »Picture« with »P+« or »P-« and press »OK« to
confirm.
– The »Picture« menu appears.
3
4
Select »Brightness« with »P+« or »P-« and press »P+« again.
– The second page of the picture menu appears.
Picture
Press »P+« or »P-« to select the function or setting.
– Options:
»H Position« – adjust the horizontal picture position
»V Position« – adjust the vertical picture position
»Phase« – removes horizontal flicker, blurring and horizontal
lines
H Position
V Position
Phase
Auto position
Zoom
To Page 1
»Auto position« – for automatic adjustment to the PC
Select
Back
Exit
OK
G
and edit
5
6
Press »OK« to activate the function and » « or » « to adjust.
Ǹ
Ƿ
Press »i« to finish the setting.
29
______________________________
SPECIAL SETTINGS
Setting television channels
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Setting channels using the search
Setup
1
2
3
4
5
Press »i« to open the »MAIN MENU«.
ATS
– The »MAIN MENU« appears.
Installation
Program table
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Select
Back
Exit
OK
Select »Installation« with »P+« or »P-« and confirm with
»OK«.
G
and open
Select »Program no« with »P+« or »P-« and set the preset
Installation
channel with » « or » «.
Ǹ
Ƿ
Program no
System
Channel
Band
1
B/G
6
Select »Search« with »P+« or »P-« and start the search with
« or » «.
»
Ǹ
Ƿ
C
Search
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
Fine tuning
Store
Select
Back
Exit
and edit
Note:
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Ǹ
Ƿ
Installation
Program no
System
Channel
Band
1
6
7
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
B/G
6
C
Note:
Search
Fine tuning
Store
To set other television stations, repeat steps 3 to 6.
Press »i« to finish the setting.
Select
Back
Exit
OK
G
and edit
30
______________________________
SPECIAL SETTINGS
Fine tuning television channels
The television automatically tunes itself to the best possible recepti-
on. You may need to carry out manual fine tuning in areas where
there is poor reception.
1
2
3
4
5
6
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
Installation
Program no
System
Channel
Band
1
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
B/G
6
C
Search
Select »Installation« with »P+« or »P-« and confirm with
»OK«.
Fine tuning
Store
Select »Fine tuning« with »P+« or »P-« and set it with »
«
Ǹ
Select
Back
Exit
and edit
or » «.
Ƿ
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
Press »i« to finish the setting.
Setting the television channels by entering the
channel numbers
1
2
3
4
Press »i« to open the »MAIN MENU«.
Setup
– The »MAIN MENU« appears.
ATS
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Installation
Program table
Select »Installation« with »P+« or »P-« and confirm with
»OK«.
Select
Back
Exit
OK
G
and open
Select »Program no« with »P+« or »P-« and set the preset
channel with » « or » «.
Ǹ
Ƿ
Installation
Program no
System
Channel
Band
1
5
6
Select »Band« with »P+« or »P-«.
B/G
6
Press » « or » « to choose between »S« (special channel)
Ǹ
Ƿ
C
and »C« (channel).
Search
Fine tuning
Store
7
8
Select »Channel« with »P+« or »P-«.
Press » « or » « to switch up and down channels or use
»1…0« to enter the channel number directly.
Select
Back
Exit
Ǹ
Ƿ
and edit
Note:
Installation
The current system is automatically displayed in the »System«
line. Select »System« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with » « or » «.
Program no
System
Channel
Band
1
B/G
6
Ǹ
Ƿ
C
9
Select »Store« with »P+« or »P-« and confirm with »OK«.
Search
Fine tuning
Store
– The »Stored« message appears.
Note:
Select
Back
Exit
To set the other television stations, repeat steps 3 to 9.
OK
G
and edit
10 Press »i« to finish the setting.
31
______________________________
SPECIAL SETTINGS
Re-tuning all television channels
You can re-tune all the television stations, for example if you move
to another town.
Setup
ATS
1
2
Press »i« to open the »MAIN MENU«.
Installation
Program table
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Select
Back
Exit
OK
G
and open
3
Select »ATS« with »P+« or »P-« and confirm with »OK«.
– The »ATS« menu appears.
4
5
Press » « or » « to select the country.
Ǹ
Ƿ
ATS
United Kingdom
Country
Select »Autoprogram« with »P+« or »P-« and confirm with
»OK«.
Autoprogram
– A warning message appears.
Select
Back
Exit
and edit
6
Press »Ȅ« (green) to start the search.
– The search begins. It may last a few minutes, depending on
the number of television stations found.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Note:
You can interrupt the search by pressing »OK«.
32
_____________________________________
INFORMATION
Technical data
Operating voltage: 100-240 V, 50/60 Hz
Power consumption: in operation 120 W
in standby approx. 2 W (Lenaro 26)
in operation 165 W
in standby approx. 2 W (Lenaro 32)
Sound output:
2 x 14 watts music (2 x 7 sine wave)
(Lenaro 26)
2 x 20 watts music (2 x 10 sine wave)
(Lenaro 32)
Reception range:
Preset channels:
Screen size:
C01 … C80, special channels S01 … S41
99 and 8 AV
66 cm/26“ (Lenaro 26)
81 cm/32“ (Lenaro 32)
Max. resolution:
Weight (WEEE):
WXGA 1366 x 768
approx. 14,21 kg (Lenaro 26)
approx. 20,91 kg (Lenaro 32)
Service information for dealers
The television set may only be operated with the mains adapter sup-
plied.
The product complies with the following EU directives:
73/23/EEC directive for electrical equipment to be used within
defined voltage ranges. 89/336/EEC directive on electromagnetic
compatibility.
The device complies with the following standards: EN 60065,
EN 55013, EN 55020.
Environmental note
This product has been made from high-quality parts and materials
which can be re-used and recycled.
Therefore, do not throw the product away with normal household
waste at the end of its life. Take it to a collection point for recycling
electrical and electronic devices. This is indicated by this symbol on
the product, in the operating manual and on the packaging.
Please find out about collection points operated by your local
authority.
Help protect the environment by recycling used products.
Subject to alteration and correction!
33
_____________________________________
INFORMATION
Troubleshooting
If the remedies given below do not work, please consult an authori-
sed GRUNDIG dealer. Please bear in mind that malfunctions can
also be caused by external devices such as video recorders or satel-
lite receivers.
Fault
Possible cause
Remedy
Screen lit (snow), but no
station
Antenna cable
Is the antenna cable
connected?
No television station pro-
grammed
Start the station search
Poor picture contrast
Picture settings incorrectly Adjust the brightness,
set
contrast or colour setting
Problem at station
Test with another channel
Interference to picture
and/or sound
Interference from other
devices
Change the position of the
device
Ghosts, reflection
Channel setting
Automatic or manual chan-
nel setting/fine tuning
Antenna
Have antenna cable or
system checked
No colour
Colour intensity at minimum Turn up the colour
TV standard setting (if Select the correct colour
setting option is available) standard
Problem at station
Test with another channel
Picture but no sound
Volume set to minimum
Turn up or switch on the
volume
Problem at station
Test with another channel
Teletext missing or faulty
Television station (has no
Test another channel for
teletext) or antenna system fine tuning and ghosts
Station signal too weak
No optical connection
Check the antenna system
Remote control does not
work
Point the remote control at
the television set
Remote control batteries
Check the batteries, change
if necessary
Operating condition unde- Switch off the television
fined
with the main power button
for approximately
2 minutes
Picture is dark in PC mode Incorrect setting for picure Change the setting on the
resolution and picture fre- PC (for example, picture
quency on the PC
resolution 1024x768, pic-
ture frequency 60Hz)
Note:
This is a Class A product. During operation the device can cause
radio interference. In this case the user may have to remedy this.
Please contact your specialist dealer.
34
_____________________________________
INFORMATION
Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains
supply.
The range of multi-system receivers is built to work in most European coun-
tries. However, the mains plug and socket system for the UK differs from
many European countries.
This appliance has been supplied with a fitted, non-removable, approved
converter plug for use in the UK. This converter plug is fitted with a 5A rated
fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only,
which is unsuitable for UK operation, this must be cut off and immediately
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a
qualified electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible shock
hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any
other type of plug is used it must be protected by a 5A fuse either in the
plug, or at the distribution board. If this type of plug becomes defective,
ensure that the fuse is removed before disposal, to eliminate potential shock
hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct
type and rating (5A ASTA or BSI approved BS1362) must be used and the
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and
plug must not be used until a replacement is obtained. Replacement fuse
covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the follo-
wing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not cor-
respond with the coloured marking identifying terminals in your plug, pro-
ceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter “N”
or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with the let-
ter “L” or coloured red.
In no circumstance must any of the wires be connected to the terminal mar-
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-
low.
35
|